Monday 11 February 2019

Dead Design Models 1/48 Goodies

A plethora of new releases and announced items from Dead Design Models to perk up some new and old kits, kicking off in 1/48 scale. 


CM48001 Mitsubishi C5M2 Vacu Canopy & Mask for 1/48 Fine Molds kit


As shown above a vacuum formed canopy designed for open display, including spray masks, to show the cockpit detail in the 1/48 scale Fine Molds kit FB24. The canopy is split into sections - wind shield, sliding pilot's hood, centre section, observer's sideways opening hood and rear fairing for easier removal from the riser. The set also contains a separate upper rear window under which the flexible machine gun was stowed, plus complete spray masks for the canopy, both types of side window, ventral window, landing light glazing and main wheel discs. This set costs 250 Kč (€9.21 or approx. £8.48 and US$11)


 VM48037 Mitsubishi C5M2 Canopy Mask for 1/48 Fine Molds

A set of masks (shown above) designed for the 1/48 scale Mitsubishi C5M2 Babs (FB24) produced by Fine Molds to mask off the canopy glazing, side and floor windows, landing light cover and all wheel disks. This set costs 170 Kč (€6.53 or approx. £5.77 and US$7.50).


VM48039 Mitsubishi J8M Shusui Canopy Mask

A set of masks (shown above) designed for the 1/48 scale Fine Molds Mitsubishi J8M Shusui kits to mask off the canopy glazing and all wheel hubs. This set costs 130 Kč (€4.99 or approx. £4.41 and US$5.68).


VM48040 Nakajima Shisei Kikka Canopy Mask

A set of masks (shown above) designed for the 1/48 scale Fine Molds Nakajima Shisei Kikka kits to mask off the canopy glazing and all wheel hubs. This set also costs 130 Kč.


VM48041 Mitsubishi Ki-15 "Kamikaze" Canopy Mask

A set of masks (shown above) designed for the recent 1/48 scale Mitsubishi Karrigane Aircraft (Ki-15 "Kamikaze") (FB26) produced by Fine Molds to mask off the canopy glazing, all types of side windows and floor window, landing light cover and all wheel disks. This set costs 170 Kč.


VM48042 Mitsubishi Ki-15 I/II Babs Canopy Mask

A set of masks (shown above) designed for the recent 1/48 scale Mitsubishi Ki-15 I/II Babs (FB23 & FB25) produced by Fine Molds include to mask off the canopy glazing, all types of side windows and floor window, landing light cover and all wheel disks. This set costs 170 Kč.


VM48019 Yokosuka D4Y2-S / 3 Judy Night Fighter Canopy Mask

A set of masks (shown above) designed for the 1/48 scale Fine Molds Yokosuka D4Y2-S/3 Suisei /Judy Night Fighter kits to mask off the canopy glazing, lower fuselage glazing and all wheel hubs. This set also has masks for the Night Fighter variant's different windscreen. This set costs 170 Kč.

Image credit: All © 2019 Dead Design Models

3 comments:

Dan Salamone said...

I have the C5M2 canopy and masks, they are of superb quality. Buy with confidence!

Dan

Mark Smith said...

Thanks for doing these Jan, and getting them out so fast! they are beautiful.

Ken Glass said...

Thanks for the heads-up, Nick.